Overview

When a Hip Replacement Needs to Be Revised

Hip replacement is one of the most successful procedures in modern orthopedic surgery, and the vast majority of implants function well for many years. However, some hip replacements may eventually fail or develop problems that require a second, more complex surgery — known as revision hip replacement. If you are experiencing new or worsening hip pain, instability, or other concerns after a previous hip replacement, a thorough evaluation may help identify the cause and determine whether revision surgery is needed.

Revision hip replacement is technically demanding and carries higher complexity than a primary procedure. It requires specialized training, experience with a wide range of implant systems, and expertise in managing bone loss and reconstructive challenges. Choosing a surgeon with a focused practice in revision hip surgery may be an important factor in achieving a good outcome.

Why Hip Replacements May Need Revision

Several distinct problems may lead to hip replacement failure. Understanding the underlying cause is essential to planning the right revision approach:

  • Aseptic Loosening: Over time, the bond between the implant and bone may weaken, causing the component to shift or subside. This is the most common reason for revision and may become symptomatic with progressive pain and bone loss (osteolysis).
  • Wear and Osteolysis: Microscopic wear particles generated by bearing surfaces may trigger an immune response that breaks down bone around the implant, potentially leading to loosening.
  • Dislocation and Instability: Recurrent hip dislocation — when the ball slips out of the socket — may result from component malposition, soft tissue laxity, or implant wear, and may require revision to correct alignment or implant design.
  • Periprosthetic Joint Infection (PJI): Infection around a hip implant is a serious complication that may require staged revision surgery, including temporary removal of the implant, antibiotic treatment, and reimplantation after infection has been cleared.
  • Periprosthetic Fracture: A fracture of the bone around the hip implant — often from a fall or traumatic injury — may require revision surgery to stabilize the fracture and the prosthesis simultaneously.
  • Implant Failure: Component fracture or mechanical failure of the implant itself may necessitate replacement of one or more parts.
  • Unexplained Pain: Some patients develop pain without an obvious mechanical or infectious cause. A systematic diagnostic workup may help identify subtle causes such as corrosion, adverse local tissue reaction, or component edge loading.

Evaluation

How a Failing Hip Replacement Is Diagnosed

Determining why a hip replacement may be failing requires a careful, systematic evaluation. Surgeons typically combine a detailed history and physical examination with targeted diagnostic testing. No single test confirms all causes of failure, so a comprehensive workup is often needed.

Imaging Studies

  • Serial X-rays: Comparing current X-rays to earlier images may reveal component migration, subsidence, bone loss around the implant, or changes in joint space. X-rays are the starting point for most evaluations.
  • CT Scan: Computed tomography may provide more detailed three-dimensional information about implant position, bone loss patterns, and the degree of osteolysis — information that helps plan revision surgery.
  • Nuclear Medicine / Bone Scan: In selected cases, nuclear imaging may help distinguish between mechanical loosening and infection, or identify regions of active bone remodeling.

Laboratory Evaluation

  • Erythrocyte Sedimentation Rate (ESR) and C-Reactive Protein (CRP): These blood markers of inflammation are elevated in most cases of periprosthetic joint infection and are a key part of the initial screening workup for any painful hip replacement.
  • Hip Aspiration: When infection is suspected, a needle aspiration of the joint — sending fluid for cell count, culture, and additional biomarkers — may provide critical diagnostic information before surgery is planned.
  • Additional Blood Tests: Depending on clinical suspicion, other markers such as synovial fluid alpha-defensin or leukocyte esterase may also be evaluated.

The Surgery

What Revision Hip Surgery Involves

Revision hip replacement is considerably more involved than a primary procedure. The specific steps depend on which component or components need to be replaced and the extent of bone loss encountered, but the surgery generally involves:

  • Removal of Existing Implants: Careful extraction of one or more well-fixed components without causing additional bone damage is technically demanding and may require specialized instruments or extended exposure.
  • Addressing Bone Loss: Bone defects left behind after implant removal must be managed before new components can be placed. Depending on severity, this may involve bone graft, metal augments, trabecular metal cones, or structural allografts to rebuild adequate bone stock.
  • Specialized Implant Systems: Revision cases frequently require longer femoral stems that bypass areas of compromised bone and achieve fixation in healthier bone further down the shaft. Similarly, larger acetabular components with additional fixation holes or cages may be used to achieve stable cup fixation.
  • Infection Management: When infection is the cause of failure, a two-stage revision is typically preferred. The first stage removes all implants and infected tissue, and places a temporary antibiotic-loaded cement spacer. After a course of targeted antibiotics and confirmation that infection markers have normalized, the second stage reimplants permanent components.
  • Soft Tissue Reconstruction: Restoring hip stability after revision may require repair or augmentation of the soft tissue structures that normally prevent dislocation.

Revision hip replacement surgery typically takes longer than a primary procedure — often two to four hours or more depending on complexity — and requires general or regional anesthesia.

Recovery & Outcomes

What to Expect After Revision Surgery

Recovery from revision hip replacement is generally longer and more gradual than recovery from a first-time procedure. The extent and pace of recovery depend on why the revision was needed, how much bone loss was addressed, and the patient's overall health and fitness.

Early Recovery

  • Weight Bearing: Many revision patients require a period of protected or limited weight bearing — using a walker or crutches — to allow bone ingrowth or graft incorporation. Your surgeon will set specific weight-bearing restrictions based on what was done at surgery.
  • Hospital Stay: Patients undergoing revision surgery typically spend more time in the hospital than primary surgery patients, often two to four days, depending on the complexity of the procedure and any monitoring needs.
  • Physical Therapy: A structured rehabilitation program is an essential part of recovery. Therapy typically begins in the hospital and continues as an outpatient, focusing on gait training, strength restoration, and range of motion.
  • Pain Management: A multimodal approach to pain control — including regional nerve blocks, oral medications, and non-narcotic options — may help manage discomfort while minimizing opioid use during recovery.

Long-Term Outlook

The long-term prognosis after revision hip replacement varies depending on the reason for failure and the complexity of the reconstruction performed. In general:

  • Patients revised for aseptic loosening or wear without significant bone loss often achieve good functional outcomes and meaningful pain relief.
  • Revisions performed for infection carry additional considerations related to ensuring infection eradication; outcomes may be influenced by the infecting organism and the patient's immune status.
  • Complex revisions involving significant bone loss or multiple failed prior surgeries may result in outcomes that are more guarded, and expectations should be calibrated through a detailed discussion with your surgeon.
  • Full recovery to functional baseline activity — including walking without an aid — typically takes six months to one year, and significant improvement may continue beyond that timeframe.
  • Choosing a surgeon with specific fellowship training in revision arthroplasty and a high volume of revision cases may be one of the most important factors in achieving a good result.

Common Questions

Frequently Asked Questions About Revision Hip Replacement

How do I know if my hip replacement is failing?

Common signs that a hip replacement may be failing include new or worsening pain around the hip or groin that was not present after your initial recovery, a change in the sound or feel of the joint (clicking, grinding, or clunking), instability or a feeling that the hip might give way, swelling or warmth around the joint, and difficulty walking that has progressively gotten worse. If you experience any of these symptoms, evaluation by an orthopedic surgeon — including updated X-rays and possibly additional blood tests or imaging — is an important first step.

What are signs of hip replacement infection?

Signs that may suggest a hip replacement infection (periprosthetic joint infection) include persistent wound drainage or redness at the incision site, fever or chills, and increasing pain and warmth around the hip — particularly if these symptoms appear after an initial period of feeling well. In some cases, infection may develop months or even years after the original surgery without obvious external signs, making laboratory evaluation (ESR, CRP, and joint aspiration) an important part of the workup for any painful hip replacement.

Is revision hip replacement more complicated than the first surgery?

Revision hip replacement is generally significantly more complex than primary surgery. The surgeon must carefully remove well-fixed implant components, address any bone loss that has occurred around the prosthesis, restore leg length and hip stability, and implant new components that may need to span areas of deficient bone. The surgery typically takes longer, may require specialized implants such as augments, structural bone grafts, or longer femoral stems, and carries higher risks than a first-time procedure. For these reasons, selecting a surgeon with specific revision experience is especially important.

What is the recovery time for revision hip replacement?

Recovery from revision hip replacement is generally longer than recovery from a primary procedure. The exact timeline depends on the reason for revision, the extent of bone loss addressed, and the patient's overall health. Many patients require a period of protected or limited weight bearing while bone and tissue healing occurs. Full recovery to baseline activity may take six months to a year or more in complex cases. A personalized rehabilitation plan is typically developed based on what was found and corrected at surgery.

Our Specialists

Revision Hip Specialists at GOMG

Our fellowship-trained hip surgeons bring specialized expertise in revision arthroplasty, complex reconstruction, and implant failure management to every patient evaluation.

Dr. Andrew E. Yoo, MD

Dr. Andrew E. Yoo, MD

Revision & Robotic Joint Replacement Specialist

  • Fellowship-trained in robotic-assisted total and revision hip and knee arthroplasty at UT Houston
  • Chief Resident Teaching Award, UC San Diego
  • Specializes in complex revision hip and knee reconstruction
  • Experienced in managing implant failure, bone loss, periprosthetic fracture, and infection
View Full Profile
Dr. Peter B. Hanson, MD

Dr. Peter B. Hanson, MD

Hip & Knee Specialist

  • 3,000+ direct anterior hip replacements performed since 2005
  • Fellowship-trained, Total Joint Reconstruction — Scripps Clinic
  • Board Certified, American Board of Orthopaedic Surgery
  • Fellow, American Academy of Orthopaedic Surgeons
View Full Profile

Concerned About Your Hip Replacement?

If you are experiencing new pain, instability, or other symptoms after a previous hip replacement, our revision specialists can evaluate your implant, review your imaging, and walk you through all available options.

Book a Consultation Call 619.462.3131